Need More Information?REQUEST A QUOTE
name
email
comment
Material Process Selection
Guides
Cut-in Place Thermoforming
Process (PDF - 120KB)
In-Line Thermoforming with
Steel Rule or Forged Steel
Trim with Vacuum, Air
Pressure and Plug Assist
(PDF - 140KB)
Modular Two-Station Forming
With Matched Metal Trim
(PDF - 119KB)
Physical Properties
Comparison
(PDF - 354KB)
MSI for Customers
(PDF - 17.9KB)
Trouble Shooting GuideGeneral Thermoforming and
Cutting Troubleshooting
Guide (PDF - 74.1KB)
Standard Thermoforming
Equipment Overview
(PDF - 292KB)

AEI Polypropylene

Cupcake   Flag & CPET   Heart


Advanced Extrusion’s polypropylene material offers excellent physical, mechanical, chemical and thermal properties. These properties can be tailored to fit many different applications. Given the low density of Polypropylene it offers higher yields, along with excellent transparency, moisture barrier, toughness and formability. With the high heat resistant capabilities of this material, it makes it an excellent choice for microwave safe products.

RFQ / RFI

Specifications

General Capabilities
  • J.I.T.
  • Contract
  • O.E.M.
Industry Focus
  • Aerospace
  • Automotive
  • Consumer Packaging
  • Industrial Packaging
  • Food Packaging
  • Construction
  • Electrical
  • Medical
  • Transportation
Characteristics
  • Good optics
  • Good machinability
  • Barrier to flavor
  • Grease and oil resistance
  • FDA Compliant
  • Microwavable
Colors
  • Available in custom colors
Industry Standards
  • AIB
  • ANSI
  • ASME
  • ASTM
  • FDA Certified
  • GMP
  • ISO
  • Kosher Certified
  • Mil-Spec
Additional Services Provided
  • Internal Silicone Available
  • Clarifying additive available
  • Mono-layer
  • Side by Side
Gauge
  • Min: 0.020 in (0.508 mm)
  • Max: 0.060 in (1.524 mm)
Width
  • Min: 15 in (381 mm)
  • Max: 54 in (1371 mm)
Core Size
  • 3 in
  • 6 in
Roll O.D.
  • Min: 16 in (406.4 mm)
  • Max: 40 in (1016 mm)
Density
  • 0.9
MFR
  • 2.5 g/10 min (230°C,2.16 kg)
Tensile Strength at Yield
  • 5,700 (40) psi (Mpa)
Flexural Modulus
  • 300,000 (2,068) psi (Mpa)
Haze (50 Mil)
  • 24%
Elongation at Yield
  • 7.3%
Notched Izod Impact
  • 0.7 (37) ft-lb/in (J/m)
Heat Deflection Temp.
  • 126°C

*Typical properties; not to be construed as specifications.

*The properties shown represent the values of the resin material only and will change based on addition of resin modifications.

^ Back to top

Site Created by ThomasNet Web Solutions